备品备件参考

Easy worn out parts & Spare parts equipments (六类)

1）.Front & back side panel

产品 1. 90m,135m roller box front panel

产品 2.
90m roller box back side panel

2）. Spiral bevel gear& bevel gear box

产品 3.
90m spiral bevel gear of bevel gearbox

产品 4 .
90m spiral bevel gear

产品 5. Bevel gearbox spiral gear

产品6. 135m bevel gearbox spiral gear

3）. Shaft of roller box

产品   7.    84m,90m roll shaft of roller box

产品 8. 135m roll shaft of roller box

产品 9. 84 m roll shaft of roller box

4）. Bevel gearbox & roller box

产品 10.
84m Bevel gearbox, roller box

产品 11. 84m 8″bevel gearbox, roller box group

产品 12. 84m 6″bevel gearbox, roller box group

产品 13.
84m bevel gearbox, roller box group

产品14. 84m 6″roller box

产品15. 90m 8″roller box

产品16.
10″roller box

产品 17 84m 6″roller box

产品 18.
84m 6″roller box

产品 19.
90m 6″roller box

产品 20. 135m 6″roller box

5). Eccentric Locking Collar

产品21.    Eccentric Locking Collar

产品22.
90m,135m Eccentric Locking Collar

6）. Other spare parts

产品23. 6″8″10″taper sleeve

产品24. 90m bevel gearbox core part

产品25. 10″roller box adjustment feed screw and nut

产品26.
90m 6″8″adjustment feed screw and nut

产品27.
90m roller box sealing ring

产品28.    
90 m slip ring

产品29    135m6″8″eccentric disc

产品30 135m slip ring

产品31. 135m adjustment feed screw and nut

产品 32. 135m taper sleeve  

产品33.
135m bevel gearbox Counter shaft

产品34.
Protective cap

PS: 以上所有的小零部件都可以写同样的描述：

The rolling mill is including many component parts. If lack of any part of this machinery can not complete the job properly. And there is a separate function and greater parts.

After several years of rapid development, the new design theory and methods, new materials, the emergence of new technology, machinery parts into a new stage of development, good processing properties can be greatly reduced processing power, and material consumption,

Shorten cycle times and lower scrap rates, etc., reduce product costs.

To ensure that components can work in the specified operating conditions and during the life of our parts are all provisions must meet the following requirements:

1、Sufficient strength

To ensure that components do not occur in the external force destruction, a prerequisite when components can work properly, so the strength of the component is the ability to resist damage in the external force components.

2 Has sufficient rigidity

Deformation under external force generating components within the limits should be allowed. Ability to resist deformation components in the external force, that is, members have stiffness.

3、 Has sufficient stability

Components the ability to maintain the original form of balance.

In short, the strength, rigidity and stability and mechanical properties of materials used in the relevant